Model No. : FOG-05
| SIZE/ DIMENSIONS | Length | 600 - 2000 |
| Width | 600 - 2000 | |
| Height | 800 - 1500 | |
| CAPACITY | Maximum User Weight ( Kg ) | 120.0 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest |
| All the GI Pipes are ISI marked | Yes | |
| Main Central Pipe | 150mm Nominal Bore G.I. Pipe | |
| Main Frame Pipe, Class as per IS 1239 | Heavy | |
| Main Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 125 mm NB with 4.5 mm Thickness | |
| Grade Material as per table 2 of IS 1161 | YSt 310 | |
| Standing/ Sitting Twister Frame Pipe | 50 mm Nominal Bore G.I. Pipe | |
| Standing/ Sitting Twister Frame Pipe, Class as per IS 1239 | Heavy | |
| Standing/ Sitting Twister Frame Pipe (As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 40 mm NB with 3.2 mm Thickness | |
| Grade Material as per table 2 IS 1161 | YSt 310 | |
| Rotating Disk Support Pipe at Bottom Pipe | 100 mm Nominal Bore G.I. Pipe | |
| Rotating Disk Support Pipe, Class as per IS 1239 | Heavy | |
| Rotating Disk Support Pipe ( as per IS 1161 ) as per Clause 3, Nominal Bore & Wall Thickness | 100 mm NB with 5.4 mm Thickness | |
| Grade Material (as per table 2 of IS 1161 ) | YSt 310 | |
| Handle Frame Pipe | 32mm Nominal bore G.I. pipe | |
| Handle Frame Pipe, Class as per IS 1239 | Heavy | |
| Handle Frame Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 32 mm NB with 4 mm Thickness | |
| Grade Material per table 2 of IS 1161 | YSt 310 | |
| Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm | |
| Nominal Bore of Foundation Pipe | 150mm | |
| Foundation Pipe, Class as per IS 1239 | Heavy | |
| Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 100 mm NB with 4.5 mm Thickness | |
| Grade Material (as per table 2 of IS 1161) | YSt 310 | |
| M S Foundation Plate Thickness | 12.0 | |
| Galvanization of all Pipes | Zinc coating on the tubes shall be in accordance with IS 4736 latest. | |
| Movement must be supplied with bearings | Yes | |
| Bearings | Tapered Roller Bearing | |
| Bearings shall be self lubricating and sealed for protection against Rain and dust etc | Yes | |
| Nuts and Bolts for Assembly | Stainless Steel, G.I. | |
| Foot Rest | Fibre Reinforced Plastic | |
| Closing Caps of open ends of the pipes, bearings, bushes and base | SS 304 Grade Stainless Steel, G I Caps, Fibre Reinforced Plastic, HDPE, Nylon | |
| Thickness of closing caps ( min ) | 2, 3 | |
| All Plastic Components | U V stabilised, weather resistance | |
| COLOUR | Colour | Yellow, Red, Blue, Green, As per buyer's requirements |
| Paint// Finish | Powder Coated, UV resistant, Poly Urethane Paint, UV Resistant | |
| Paint Coating Thickness ( min ) | 80, 100 | |
| OTHER REQUIREMENTS | Other Requirement | Ergronomic Design, Equipment shall be free from entrapments and sharp edges, Installation Instructions must be provided |
| Installation | Not Included | |
| Safety and quality Requirements | European Standard EN 16630: 2015 latest | |
| Instruction Plate | Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing | |
| APPROVAL | Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer | Yes |
| WARRANTY | Warranty ( years ) | 5.0 |