AIR WALKER

  1. Home
  2. Product Details
Image

Air Walker

Model No. : FOG-02

    Advantage: This unit provides a great cardiovascular and lower body workout.  It will improve flexibility and build strength in the hips and legs

    • Unit Dimension: 45”(H),  44”(L), 12”(W)
    • Safe Area: 7’ X 7’
    • Pipe Size: 100 mm  ID B-class GI pipe (Main),
    • Leg: 40 mm  ID B-class GI pipe (Main),
    • Handel: 25 mm  ID B-class GI pipe (Main),
    • Seats: Single Step (Plastic)-2 Nos.
    • Bearings: NBC 3205- 04 Nos.  Colors: PU
    • Nut & Bolts: S.S.(3/8  x 1½” LN-2,5/16 w)

Specificatiions:

SIZE/ DIMENSIONS Length 800 - 2200
Width 350 - 600
Height 1200 - 1600
CAPACITY Maximum User Weight ( Kg ) 110.0
MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest
All the GI Pipes are ISI marked Yes
Main Frame 125 mm Nominal Bore G.I. Pipe
Main Frame Pipe, Class as per IS 1239 Not applicable for pipe as per IS 1161
Designation of Main Frame Pipe ( as per IS 1161 ) Any applicable text(s)
leg movement frame 40mm Nominal Bore G.I. Pipe
Leg Movement Frame Pipe, Class as per IS 1239 Not applicable for pipe as per IS 1161
Designation of Leg movement frame Pipe ( as per IS 1161 ) Any applicable text(s)
Handle Frame 25mm Nominal bore G.I. pipe
Handle Frame Pipe, Class as per IS 1239 Not applicable for pipe as per IS 1161
Designation of Handle Frame Pipe ( as per IS 1161 ) Hint must be declared as per clause 3 of IS 1161 indicating nominal bore, wall thickness and grade ( not applicable for pipe as per IS 1239 ) Any applicable text(s)
Movement must be supplied with bearings Yes
Bearings Tapered Roller Bearing
Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes
Foot Rest Aluminum casting material
MS Foundation Plate Thickness 12.0
Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
Nominal Bore of Foundation Pipe 125mm
Foundation Pipe, Class as per IS 1239 Not applicable for pipe as per IS 1161
Designation of Foundation Pipe ( as per IS 1161 ) Any applicable text(s)
Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest.
Nuts and Bolts for Assembly Stainless Steel, G.I.
Closing Caps of open ends of the pipes, bearings, bushes and base SS 304 Grade Stainless Steel, G I Caps, Fibre Reinforced Plastic, HDPE, Nylon
Thickness of closing caps ( min ) 2, 3
All Plastic Components U V stabilised, weather resistance
COLOUR Colour Yellow, Red, Blue, Green, As per buyer's requirements
Paint// Finish Powder Coated, UV resistant, Poly Urethane Paint, UV Resistant
Paint Coating Thickness ( min ) 80, 100
OTHER REQUIREMENTS Ergonomic Design Yes
Foot rest shall be antislip/ antiskid Yes
Moving ( swinging ) Scope should be Limited Yes
There shall be no crushing or searing points for user between moving and / or stationary parts of equipment during use Yes
Equipment shall be free from entrapments and sharp edges Yes
Installation Instructions must be provided Yes
Installation Included
Safety and quality Requirements European Standard EN 16630: 2015 latest
Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing
     
APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes
WARRANTY Warranty ( years ) 3.0

Back