Model No. : FOG-04
| SIZE | Length | 1000 - 2000 |
| Width | 650 - 800 | |
| Height | 1600 - 2200 | |
| CAPACITY | Maximum User Weight ( Kg ) | 100.0 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest |
| All the GI Pipes are ISI marked | Yes | |
| Main Central Pipe | 100mm Nominal Bore G.I. Pipe | |
| Main Central Pipe, Class as per IS 1239 | Heavy | |
| Designation of Main Central Pipe ( as per IS 1161 ) | Any applicable text(s) | |
| Moving Frame Pipe | 32mm Nominal bore G.I. pipe | |
| Moving Frame Pipe, Class as per IS 1239 | Heavy | |
| Designation of Moving Frame Pipe ( as per IS 1161 ) | Any applicable text(s) | |
| Foot Rest Frame/ Foot Rest Hinging Pipe | 25mm Nominal Bore G.I. Pipe | |
| Foot Rest Frame Pipe, Class as per IS 1239 | Medium | |
| Designation of Foot Rest Frame Pipe ( as per IS 1161 ) | Any applicable text(s) | |
| Connecting Links | 25mm Nominal Bore G.I. Pipe | |
| Connecting Links Pipe, Class as per IS 1239 | Heavy | |
| Designation of connecting link Pipe ( as per IS 1161 ) | Any applicable text(s) | |
| MS Foundation Plate Thickness | 10.0 | |
| Foundation Pipes with anchoring | 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm | |
| Nominal Bore of Foundation Pipe | 80mm | |
| Foundation Pipe, Class as per IS 1239 | Heavy | |
| Designation of Foundation Pipe ( as per IS 1161 ) | Any applicable text(s) | |
| Galvanization of all Pipes | Zinc coating on the tubes shall be in accordance with IS 4736 latest. | |
| Nuts and Bolts for Assembly | Stainless Steel, G.I. | |
| Movement must be supplied with bearings | Yes | |
| Bearings | Ball Bearing | |
| Bearings shall be self lubricating and sealed for protection against Rain and dust etc | Yes | |
| Seat and Back Rest | 3mm thick, HDPE with uniform bending radius to avoid sharp edges | |
| Foot Rest | Fibre Reinforced Plastic, Aluminum casting material, C.I., LDPE, HDPE, Nylon | |
| Closing Caps of open ends of the pipes, bearings, bushes and base | SS 304 Grade Stainless Steel, G I Caps, Fibre Reinforced Plastic, HDPE, Nylon | |
| Thickness of closing caps ( min ) | 2, 3 | |
| All Plastic Components | U V stabilised, weather resistance | |
| COLOUR | Colour | Yellow, Red, Blue, Green, As per buyer's requirements |
| Paint// Finish | Powder Coated, UV resistant, Poly Urethane Paint, UV Resistant | |
| Paint Coating Thickness ( min ) | 80, 100 | |
| OTHER REQUIREMENTS | Ergonomic Design | Yes |
| Foot rest shall be antislip/ antiskid | Yes | |
| Moving Scope should be Limited | Yes | |
| There shall be no crushing or searing points for user between moving and / or stationary parts of equipment during use | Yes | |
| Equipment shall be free from entrapments and sharp edges | Yes | |
| Installation Instructions must be provided | Yes | |
| Installation | Included | |
| Safety and quality Requirements | European Standard EN 16630: 2015 latest | |
| Instruction Plate | Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing | |
| APPROVAL | Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer | Yes |
| WARRANTY | Warranty ( years ) | 2.0 |